Hioki 3194 là thiết bị đo đa năng dùng để phân tích thông số điện của động cơ, tính toán thông số tốc độ, moment, hiệu suất của động cơ DC, AC.
FEATURES / TÍNH NĂNG
Features:
- Phân tích thông số đánh giá động cơ, tốc độ, moment, hiệu suất quy đổi / Analysis station for motor evaluation, rotation speed, torque, converter efficiency
- Đo DC, AC 1 pha 2 dây đến 3 pha 4 dây / DC, or Single-phase 2-wire to 3-phase 4-wire
- 6 kênh cho dòng điện trực tiếp hoặc qua biến dòng /6ch-Direct/ Clamp input
- Phân tích sóng hài đến bậc 3000 / Harmonic analysis up to 3000th order
SPECIFICATION / THÔNG SỐ KỸ THUẬT CƠ BẢN
| Basic specifications (Accuracy guaranteed for 6 months) |
 |
| Measurement lines |
Single-phase 2-wire, single-phase 3-wire, three-phase 3-wire, and three-phase 4-wire systems |
| Number of channels |
Up to 6 channels from input channels 1 to 6, depending on 3194 wiring mode, Up to 3 channels at Harmonic Waveform Analysis mode |
| Data output |
FD, RS-232C or GP-IB interface, Printer |
| Measurement range |
Fundamental frequency 10 Hz to 4.5 kHz |
|
|
| Harmonic Waveform Analysis Functions |
|
| Measurement method |
PLL locked sampling or external clock sampling method |
| A/D resolution |
12-bits |
| Window type |
Rectangular (with gap between windows) |
| Crest factor |
2.5 or less (Voltage and Current) |
| PLL source |
Voltage (U), current (I) or external synchronization of the selected measurement channel |
| External synchronization signal |
Input to a rear panel control terminal on the 3194 main unit
Input level: 1 V to 10 Vrms (for sine waves)
Division function: 1/1 to 1/255 |
| Measurement items |
RMS voltage, RMS current, effective power value, frequency, ±U peak, ±I peak |
| Harmonic waveform measurement items |
Harmonic level, Included percentage of harmonic wave, Phase angle of harmonic wave, Total harmonic distortion
Note: Sorts according to decreasing order of analysis, displays up to 50th order |
| Screen displays |
List, bar-graph, vector and waveform displays |
|
|
| Other Functions |
|
| Wiring conversion |
Δ−Y voltage conversion, Y−Δ voltage conversion |
| Sort function |
Sorts according to decreasing order of analysis, displays up to 50th order |
| Averaging function |
Index average with time constant of 1.5 sec |
| Power requirements |
100/120/200/230 V AC, switched automatically , 50/60 Hz, 150 VA max. |
| Dimensions, mass |
430 mm (16.93 in) W × 150 mm (5.91 in) H × 370 mm (14.57 in) D, 13 kg (458.6 oz) (with options) |
| Supplied accessories |
Instruction Manual × 1, Power cord × 1, Connector × 1 |
|
Download Catalogue
Hioki 3194
Các sản phầm cùng chức năng phân tích điện năng (Power Quality Analyzer)
